Tubería de acero de precisión ASTM A106 A53
Obtener el último precioTipo de Pago: | L/C,T/T,D/P |
Incoterm: | FOB,CFR,CIF,EXW |
transporte: | Ocean,Land,Express |
Hafen: | Qingdao,Shanghai,Tianjin |
Tipo de Pago: | L/C,T/T,D/P |
Incoterm: | FOB,CFR,CIF,EXW |
transporte: | Ocean,Land,Express |
Hafen: | Qingdao,Shanghai,Tianjin |
Modelo: ASTM A106 A53
Marca: H-Tong
Standard: Bs, Gb, Astm, Jis, Din, Api
Material: A53-A369, Q195-Q345, 10#-45#, Stba20-Stba26, Mn-V Alloy, St35-St52, Stb35-Stb42
Section Shape: Round
Place Of Origin: China
Application: Fluid Pipe, Boiler Pipe, Drill Pipe, Hydraulic Pipe, Structure Pipe
Certification: Bsi, Ce, Api
Surface Treatment: Copper Coated
Tolerance: ±1%, ±3%
Category: Seamless Steel Pipe
Processing Service: Bending, Welding, Decoiling, Punching, Cutting
Name: Precision Steel Pipe
Length: 6m or Customized
OEM: Support
Size: Customized
Production Process: Hot Rolled
Special Tube: Api Pipe, Emt Pipe, Thick Wall Pipe
Steel Grade: ASTM A106 A53
La tubería de presión sin costura ASTM A106 (también conocida como tubería ASME SA106) se usa comúnmente en la construcción de refinerías de petróleo y gas, centrales eléctricas, plantas petroquímicas, calderas y barcos donde la tubería debe transportar fluidos y gases que exhiban temperaturas y niveles de presión más altos .
Introducción del producto
La tubería sin costura ASTM A106 (también conocida como tubería ASME SA106) se usa comúnmente en la construcción de refinerías de petróleo y gas, centrales eléctricas, plantas petroquímicas, calderas y barcos. Estas tuberías deben transportar fluidos que exhiban niveles de temperatura y presión más altos y la tubería de gas. A106 incluye tres grados, A106 Grado A, A106 Grado B y A106 Grado C.
Acerca de ASTM A106 GR B
ASTM A106 Gr . B Las tuberías sin costuras (también conocidas como tuberías ASME SA106 GR B) son un tubo nominal de tubería de acero sin costuras CS para uso de alta temperatura. La composición química de un 106 gr.b es la siguiente:
C≤0.25 , mn = 0.27-0.93 , p≤0.035 , s≤0.035 , si≤0.1 , cr≤0.4 , cu≤0.4 , propiedades mecánicas: ÓB≥415 / MPA, ÓS≥240 / mPA.
Acerca de ASTM A106 GR C
ASTM A106 Gr . C Las tuberías sin costuras (también conocidas como tuberías ASME SA106 Gr C) son una tubería de acero de carbono-manganeso para calderas y sobrecalentadores de alta temperatura de alta temperatura. Su composición química es simple y similar al acero de carbono 20G, pero su contenido de carbono y manganeso es mayor, por lo que su resistencia al rendimiento es aproximadamente un 12% mayor que el de 20 g, y su plasticidad y tenacidad no son malas. El acero tiene un proceso de producción simple y una buena trabajabilidad fría y caliente. Usarlo para reemplazar los encabezados de 20 g (economizador, pared de agua, sobrecalentador de baja temperatura y encabezado de rehallas) puede reducir el grosor de la pared en aproximadamente un 10%, lo que puede ahorrar costos de material, reducir la carga de trabajo de soldadura y mejorar los encabezados de la diferencia de estrés en la inicio de la inicio .
Datos técnicos
Requisitos químicos de ASTM A106 Grado A, B y C
Grade |
Grade A |
Grade B |
Grade C |
Carbon max. % |
0.25 |
0.30 |
0.35 |
Manganese % |
0.27 to 0.93 |
0.29 to 1.06 |
0.29 to 1.06 |
Phosphorous, max. % |
0.035 |
0.035 |
0.035 |
Sulfur, max. % |
0.035 |
0.035 |
0.035 |
Silicon, min.% |
0.10 |
0.10 |
0.10 |
Chrome, max. % |
0.40 |
0.40 |
0.40 |
Copper, max. % |
0.40 |
0.40 |
0.40 |
Molybdenum, max. % |
0.15 |
0.15 |
0.15 |
Nickel, max. % |
0.40 |
0.40 |
0.40 |
Vanadium, max.% |
0.08 |
0.08 |
0.08 |
Nota: Total de Cr, Cu, Mo, Ni y V no excederá el 1%
Requisito de tracción de ASTM A106 Grado A, B y C.
Grade |
Grade A |
Grade B |
Grade C |
Tensile Strength, min., psi |
48000 |
60000 |
70000 |
Yield Strength, min., psi |
30000 |
35000 |
40000 |
Propiedades mecánicas de las tuberías sin costuras ASTM A106
ASTM A106 Steel Grade |
Tensile Test MPa or N/mm2 |
||
Min. Yield Point |
Min. Tensile Strength |
Elongation (%) |
|
Grade A |
205 |
330 |
20 |
Grade B |
240 |
415 |
20 |
Grade C |
275 |
485 |
20 |
Equivalentes de tuberías sin costuras ASTM A106
Specification |
Mechanical Properties |
Grade A |
Grade B |
Grade C |
ASTM A53 |
Tensile strength, min, psi (MPa) |
48000(330) |
60000(415) |
|
Yield strength, min, psi (MPa) |
30000(205) |
35000(240) |
|
|
ASTM A106 |
Tensile strength, min, psi (MPa) |
48000(330) |
60000(415) |
70000(485) |
Yield strength, min, psi (MPa) |
30000(205) |
35000(240) |
40000(275) |
Requisitos de fabricación y prueba para tuberías sin costuras A106
Heat Treatment |
Hot-finished pipe need not be heat treated. Cold drawn steel tube shall be heat treated after the final cold draw pass at a temperature of 1200 °F (650 °C) or higher. |
Process |
The steel shall be killed steel, with the primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining. If secondary melting, using electroslag remelting or vacuum-arc remelting is subsequently employed, the heat shall be defined as all of the ingots remelted from a single primary heat. Steel cast in ingots or strand cast is permissible. When steels of different grades are sequentially strand cast, identifi- cation of the resultant transition material is required. The producer shall remove the transition material by any estab- lished procedure that positively separates the grades. |
Surface Treatment |
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting |
Hydrostatic Testing |
Inspection test pressures produce a stress in the pipe wall equal to 60% of specified minimum yield strength (SMYS) at room temperature. Maximum Pressures are not to exceed 2500 psi for NPS3 and must stay under 2800 psi for the larger sizes. Pressure is maintained for not less than 5 seconds. |
Nondestructive Electric Test |
The full body of each pipe shall be tested with a nondestructive electric test in accordance with Practice E 213, E 309, or E 570. |
Mechanical Tests Specified |
Tensile Test — NPS 8 and larger — either transverse or longitudinal acceptable smaller than NPS 8 — weighed in lots. Larger sizes — by length. Flattening Test — NPS 2-1/2 and larger. Bending Test (Cold) — NPS 2 and under. |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.